Special Sun A•H•M Technology（Shanghai）Co.,Ltd.

Special Sun A·H·M Technology（Shanghai）Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000

Categories: Circuit Protection     
TVS - Diodes          
Series: 1.5KE     
Packaging: Ammo Box, Bulk       
Part Status: Active     
Type: Zener     
Bidirectional Channels: 1             
Power - Peak Pulse: 1500W (1.5kW)         
Applications: General Purpose         
Operating Temperature: -55°C ~ 175°C (TJ)     
Mounting Type: Through Hole     
Package / Case: DO-201AD, DO-27, Axial     

Pouplar TVS 1.5KE: 1.5KE6.8 1.5KE6.8A 1.5KE7.5 1.5KE7.5A 1.5KE8.2 1.5KE8.2A 1.5KE9.1 1.5KE9.1A 1.5KE10 1.5KE10A 1.5KE11 1.5KE11A 1.5KE12 1.5KE12A 1.5KE13 1.5KE13A 1.5KE15 1.5KE15A 1.5KE16 1.5KE16A 1.5KE18 1.5KE18A 1.5KE20 1.5KE20A 1.5KE22 1.5KE22A 1.5KE24 1.5KE24A 1.5KE27 1.5KE27A 1.5KE30 1.5KE30A 1.5KE33 1.5KE33A 1.5KE36 1.5KE36A 1.5KE39 1.5KE39A 1.5KE43 1.5KE43A 1.5KE47 1.5KE47A 1.5KE51 1.5KE51A 1.5KE56 1.5KE56A 1.5KE62 1.5KE62A 1.5KE68 1.5KE68A 1.5KE75 1.5KE75A 1.5KE82 1.5KE82A 1.5KE91 1.5KE91A 1.5KE100 1.5KE100A 1.5KE110 1.5KE110A 1.5KE120 1.5KE120A 1.5KE130 1.5KE130A 1.5KE150 1.5KE150A 1.5KE160 1.5KE160A 1.5KE170 1.5KE170A 1.5KE180 1.5KE180A 1.5KE200 1.5KE200A 1.5KE220 1.5KE220A 1.5KE250 1.5KE250A 1.5KE300 1.5KE300A 1.5KE350 1.5KE350A 1.5KE400 1.5KE400A 1.5KE440 1.5KE440A    

Datasheet:  http://www.spsdiode.com/Datasheet/SPS-1.5KE6.8A-THRU-1.5KE440CA.pdf

Special Sun A·H·M Technology（Shanghai）Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000

Main characteristics of transient suppression diodes:

Reverse off-state voltage (cut-off voltage) VRWM and reverse leakage current IR: Reverse off-state voltage (cut-off voltage) VRWM represents the highest voltage at which the TVS diode does not conduct. There is only a small reverse leakage current IR at this voltage. .

Breakdown voltage VBR: The voltage when the TVS diode passes the specified test current IT. This is the mark voltage that indicates the TVS diode is conducting (the numbers in the P4SMA, P6SMB, 1.5SMC, P4KE, P6KE, 1.5KE series models are the breakdown voltage (The nominal value of the other series is the reverse off-state voltage value). The breakdown voltage of TVS diodes has an error range of ± 5% (without "A" is ± 10%).

Pulse peak current IPP: The maximum peak current of the 10 / 100μs wave allowed by the TVS diode (the peak current of the 8 / 20μs wave is about 5 times its value), exceeding this current value may cause permanent damage. In the same series, the higher the breakdown voltage of the tube, the smaller the peak current allowed to pass.

Maximum clamping voltage VC: The voltage appearing across the TVS tube when the pulse peak current IPP flows.

Pulse peak power Pm: Pulse peak power Pm refers to the product of the pulse peak current IPP of 10/100 μs wave and the maximum clamping voltage VC, that is, Pm = IPP * VC.

Popular TVS: P6KE6.8CA-6.8V, P6KE12CA-12V, P6KE400CA-400V 600W Axial DO-15 Package

Datasheet: http://www.spsdiode.com/Datasheet/SPS-P6KE6.8A-THRU-P6KE400CA.pdf 

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

Special Sun A·H·M Technology（Shanghai）Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000

Categories: Circuit Protection TVS - Diodes         
Series: P4KE     
Packaging: Tape & Reel (TR)      
Part Status: Active         
Bidirectional Channels: 1         
Current - Peak Pulse (10/1000μs): 750mA     
Power - Peak Pulse: 400W     
Power Line Protection: No     
Applications: General Purpose         
Operating Temperature: -55°C ~ 175°C (TJ)     
Mounting Type: Through Hole     
Package / Case: DO-204AL, DO-41, Axial     

Mechanical Data
Case: JEDEC DO-41 Low Profile Molded Plastic
Terminals: Axial Leads, Solderable perMIL-STD-202, Method 208
Polarity: Cathode Band or Cathode Notch
Marking:
Unidirectional – Device Code and Cathode Band
Bidirectional – Device Code Only

TVS is a high-efficiency protection device in the form of a diode. When the two poles of a TVS diode are subjected to reverse transient high-energy shocks, it can change the high impedance between its two poles into a low impedance at a speed of the order of 10-12 seconds, absorbing surge power of up to several kilowatts, making the two poles The voltage clamp is located at a predetermined value, which effectively protects precision components in electronic circuits from various surge pulses.

Application areas: computer systems, communication equipment, AC / DC power supplies, automobiles, electronic ballasts, household appliances, instruments (electric meters), RS232 / 422/423/485, I / O, LAN, ISDN, ADSL, USB, MP3, PDAS, GPS, CDMA, GSM, digital camera protection, common mode / differential mode protection, RF coupling / IC drive reception protection, motor electromagnetic interference suppression, audio / video input, sensor / transmission, industrial control loop, relay And suppression of contactor noise

TVS full range of products: P4KE, P6KE, 1.5KE, 3KP, 5KP, SA, SMAJ, SMBJ, SMCJ

Good selling:  P4KE6.8CA  P4KE6.8A  P4KE7.5CA  P4KE7.5A P4KE10CA  P4KE10A  P4KE12CA  P4KE11A  P4KE15CA  P4KE15A  P4KE16CA  P4KE16A  P4KE33CA  P4KE33A  P4KE36CA  P4KE36A   P4KE56CA  P4KE56A  P4KE62CA  P4KE62A P4KE100CA  P4KE100A  P4KE110CA  P4KE110A   P4KE350CA  P4KE350A  P4KE400CA  P4KE400A   P4KE440A  P4KE440CA

Datasheet: http://www.spsdiode.com/Datasheet/SPS-P4KE6.8CA-THRU-P4KE400CA.pdf